Mold, Mildew & Paver Coatings in Southwest Florida
The pool deck looks dark around the joints, the pavers between the lanai posts are green and the narrow edges are too tight for a normal brush. You want the mold and mildew gone without blasting water toward screens, doors or furniture, and you would like the clean surface protected when the work is done.
Starting at $199 · free flat-rate quote before we start
Mold and mildew on interlocking pavers, pool decks and tight joints need more than a quick rinse: remove the growth, wash the adjacent surfaces, let everything dry, then apply the right exterior sealer for the material. We can clean the hard-to-reach spaces, power wash nearby areas and seal the finished surface so it stays easier to maintain.
How it works
Inspect the material and the access
We identify paver type, joint material, drainage, nearby screens and the areas that need low-pressure detail work. The right method depends on whether the surface is concrete, brick, coated or polymeric-jointed.
Treat and lift the growth
Mold and mildew are treated before washing so the cleaning reaches into joints and textured edges. We work in manageable sections and keep runoff away from doors, pool equipment and planted beds.
Power wash adjacent surfaces
The pool deck, coping edge, lanai perimeter and nearby walkway can be cleaned as part of the same visit. We adjust pressure and distance to avoid etching pavers or forcing water into screens and openings.
Dry, then seal
Sealing happens after the surface and joints are clean and dry. We apply the product appropriate for the material and explain when the area can take foot traffic, furniture and pool use again.
The details that matter
Cleaning tight paver joints
A worker cleans mildew from tight interlocking paver joints beside a pool, keeping the spray controlled around the lanai.
- Interlocking pavers
- Tight-space cleaning
- Mildew removal
Sealing a clean pool deck
A worker applies a clear protective coating to cleaned pavers on a sunny Florida pool deck after mildew removal.
- Paver coating
- Pool deck sealing
- Outdoor surface care
Worth knowing before you start
Cleaning and sealing are separate steps
Sealer does not replace removal. Applying it over active growth or trapped moisture can lock in a problem and leave a patchy finish, so the surface must be clean and dry first.
Tight joints need controlled pressure
A narrow joint beside a screen frame or pool edge is not the place for maximum pressure. Careful distance, spray angle and runoff control protect the surface and the home around it.
Sealer choice depends on the paver
Natural stone, concrete pavers, brick and polymeric joints do not all take the same product. We confirm the material and desired finish before recommending a coating.
Humidity slows drying
Florida humidity, shade and afternoon rain can extend the dry time. We plan around weather and tell you when the deck can be used instead of promising a rushed same-day return to service.
You may not need to hire anyone for this
The parts you can genuinely handle on your own. We would rather tell you than sell you.
- Move furniture, toys and loose items off the deck before the visit
- Keep doors and screens closed while adjacent surfaces are being washed
- Photograph stains and joints before cleaning so you can compare the result
- Avoid household bleach mixes and unknown sealers on pavers
- Follow the sealer label for cure time before walking, furnishing or using the pool area
Where mold & mildew coatings comes in
- Remove mold and mildew from pavers, pool decks and tight joints
- Clean lanai edges, walkways, coping and adjacent hard surfaces
- Adjust pressure around screens, doors, drains and pool equipment
- Apply a compatible exterior sealer after the surface is clean and dry
- Protect nearby furniture, plants and finishes during the wash
- Return for a maintenance wash when the surface needs a refresh
Mold & Mildew Coatings — starting at $199
Coating and mildew work is quoted from surface area, access, joint condition and the sealer selected. Send photos of the pool deck, tight spaces and adjacent surfaces to (239) 494-3305 for a clear scope before we schedule.
Text us a photo and a quick description. We'll send a flat quote — usually within the hour.
Text Us a PhotoStarting pricesFrequently asked questions
Can you remove mold and mildew from interlocking pavers?
Yes. We treat and wash the growth from pavers and tight joints, clean adjacent hard surfaces, let the area dry and then apply a compatible sealer when the material is ready.
Will power washing damage a pool deck?
It can if the pressure, distance or spray angle is wrong. We adjust the method for the paver and protect screens, doors, drains, pool equipment and nearby finishes.
Do you seal after cleaning?
Yes, when sealing makes sense for the material and the surface is fully clean and dry. We explain the product, finish and cure time before applying it.
How long before we can use the deck?
Drying and cure time depend on the weather, shade, material and sealer. We give you the product-specific return-to-use window instead of treating every deck as the same.
Can you clean around a screened lanai and pool equipment?
Yes. Send photos of the access and the tight spaces. We plan the spray direction and runoff so cleaning reaches the joints without forcing water into screens, doors or equipment.
Related services
Lanai, screens, and pavers — brought back to life.
The guest room is clean but the wall is full of old picture holes, the hallway has a dark scuff and the lanai has a few things that should have gone months ago. Family is coming, a listing photographer may visit or you simply want the home to look cared for before the holidays without starting a renovation.
The kitchen is half out. There are cabinets in the driveway, a pile of tile and backer board in the garage, an old range nobody has moved, and a skip you thought was included that never arrived. The contractor says demolition debris was not in the quote. Your neighbours are starting to look at the driveway.
Checkout was at ten, check-in is at four, and the cleaner has just sent you a photograph of a collapsed sofa bed and three bags of things a guest left behind. You are in Michigan. The next guests have already landed at RSW.
Junk removal across SWFL — we load it, sweep up, and haul it away, often same-day when we have a truck open.
Whole-property cleanouts across Southwest Florida — we clear it all out.
Need it fixed, moved, or hauled?
Call, text a photo, or send a quote request. Most jobs quoted same day.